China factory 5-15mm High Chevron Conveyor Belt, Rubber Chevron V Belt axle differential

Product Description

         Chevron ribbed conveyor belt factory conveyor belt        

Chevron Conveyor Belts are precision designed and developed for providing desired space-saving on steep inclines which can go up to 40 Degrees. In such situations, these conveyor belts are designed to deliver enhanced load carrying capacity in bulk with lump size of up to 150mm.

Belt types

♦ Types: Open V, Closed-V, L type, H type, Y type, A type and F type, etc.

♦ Width: 400MM-1200MM

♦ Thickness: 4-50mm

♦ Types: EP80-EP630

♦ Feature: Good adhesion and long working life

Chevron Pattern Conveyor Belt Features 
1. Excellent elasticity 
2. Anti-impact 
3. High-adhesion 
4. Good flexibility 
5. Trough ability 
6. Better stability of size 
7. Resistance to water 
8. Heat resistance in comparison to NN belt 

Advantage :
Some of the standard features of these conveyor belts include:
For meeting the demands of high capacity conveying at steep angles
Designed to prevent load slippage or roll back of products while conveying
Comes with cleats that are integrally molded with top cover rubber that prevents separation from belt
Cleats also helping in achieving high abrasion resistance as well as elastic rubber compounds for desired flexibility
Can be offered in different cleat heights as well as widths depending on application requirements
Can be made available in varied finish design specifications
Following precision design standards that ensure belt has smooth run on conventional return idlers, thus needing no conveyor modification
Belting support provided allowing smooth transition from conventional flat belt to Chevron Conveyor Belts
Can be manufactured in all cover grades including abrasion resistant M24, HR, OR, FR
Available in white finish that helps in maintaining better hygiene standards
Application Areas:
Some of the areas of application include for meeting the transportation demands of:

Wood Chips Sand & Gravel
Heavy Duty Scrap metal Minerals – Coal & Ore
Materials – Fine Coal & Grains Waste & Recycling Plants
Road Construction Crushing Industries
Bagged Materials Steel Pellets

Selections:
Selection the type and height of cleats depends on the material to be conveyed and the angle of inclination:

Type of material Material example Max. angle of inclination
Height of cleats
H(mm):
14
H(mm):
16
H(mm):
25
H(mm):
32
Powdery Flour, etc. 25° 25° 28° 30°
Loose flowing Corn, barley, wheat, rye, etc. 20/25° 20/25° 25/30° 25/30°
Loose rolling Gravel, ground stone, etc. 25° 25° 28° 30°
Sticky Wet sand, ash, wet loam, etc. 30° 30/35° 35/40° 40/45°
Packed Sacks, paper sacks, etc. 30/35° 30/35° 35/40° 35/40°

 
Cleat pattern ranges

1. Conveyor belts with Close V type profiles

2.Conveyor belts with U type profiles

3.Conveyor belts with Y type profiles

4.Conveyor belts with G type profiles

Picture

 
Shipping:

Certificate:

 
FAQ:
(1)Q: Are you a factory or trading company
A: We are factory with export license. We have the most convenient transportation conditions.
(2)Q: Do you offer samples?
A: We are glad to offer you free samples. New clients are expected to pay for the delivery cost,this charge will be deducted from the payment for formal order.
(3)Q: How about the lead time?
A: Within10-20 days after getting the prepayment or L/C.
(4)Q: How can we pay?
A: For small sample shipping cost, you can pay either by paypal or by T/T.  And by T/T or L/C at sight for large amount of the order.
(5)Q: Can you do CO, Form E, Form F, Form A etc? 
A: Yes, we can do them for you.
Welcome to visit our web: qdbothwin  for more conveyor belt and rubber sheet information. 
  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Type: EP200
Material: Rubber
Inside Material: Fabric
Feature: Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant
Tensile Strength: Strong
Tensile: 10-25MPa
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

v belt

Are there any specific guidelines for aligning pulleys and V-belts?

Proper alignment between pulleys and V-belts is essential to ensure smooth operation, minimize wear, and maximize the efficiency of the belt drive system. Here are some specific guidelines for aligning pulleys and V-belts:

  1. Parallel Alignment:
  2. The pulleys should be aligned parallel to each other, meaning that the axes of the pulleys should be in the same plane. This ensures that the V-belt runs straight and evenly between the pulleys. Misalignment can cause the belt to run at an angle, leading to increased wear and reduced efficiency.

  3. Angular Alignment:
  4. In addition to parallel alignment, the pulleys should be aligned angularly. This means that the pulley faces should be perpendicular to the belt’s direction of travel. Angular misalignment can cause the belt to twist and create uneven tension, resulting in increased wear and potential belt failure.

  5. Alignment Tools:
  6. To achieve proper alignment, various alignment tools can be used, such as straightedges, laser alignment tools, or alignment software. These tools help in measuring and adjusting the alignment of pulleys, ensuring precise parallel and angular alignment.

  7. Adjustment Methods:
  8. To adjust the alignment of pulleys, different methods can be employed. Common adjustment methods include shimming, moving the pulley on its shaft, or using adjustable pulleys. The specific method depends on the type of pulley and the adjustment capabilities of the system.

  9. Regular Inspections:
  10. Regular inspections are crucial to identify and correct any misalignment issues promptly. Inspect the pulleys visually and check for any signs of misalignment, such as uneven belt wear, belt tracking issues, or abnormal belt noise. If misalignment is detected, take corrective measures to realign the pulleys.

  11. Manufacturer Recommendations:
  12. Always refer to the manufacturer’s guidelines and specifications for pulley alignment. Manufacturers often provide specific alignment tolerances and recommendations for their products, considering factors such as belt type, load, and operating conditions. Follow these recommendations to ensure proper alignment and optimize the performance of the belt drive system.

By following these guidelines for aligning pulleys and V-belts, you can minimize wear, reduce the risk of belt failure, and maximize the efficiency and lifespan of the belt drive system.

v belt

What maintenance practices are recommended for prolonging the lifespan of V-belts?

Implementing regular maintenance practices is crucial for extending the lifespan of V-belts and ensuring their optimal performance. Here are some recommended maintenance practices:

  1. Visual inspections: Conduct regular visual inspections of the V-belts to identify any signs of wear, damage, or misalignment. Look for cracks, fraying, glazing, or any visible abnormalities. Inspect the pulleys for wear or damage as well.
  2. Tension checks: Check the tension of the V-belts on a periodic basis using a tension gauge. Ensure that the belts are within the recommended tension range specified by the manufacturer. Incorrect tension can lead to belt slippage, accelerated wear, and decreased power transmission efficiency.
  3. Pulley alignment: Verify that the pulleys are correctly aligned to prevent unnecessary stress and wear on the V-belts. Misaligned pulleys can cause belt slippage, uneven load distribution, and premature failure. Adjust the pulleys as necessary to maintain proper alignment.
  4. Cleanliness: Keep the V-belts and pulleys clean and free from dirt, debris, oil, or other contaminants. Regularly clean the belt drive system to prevent the accumulation of particles that can affect belt grip and performance.
  5. Environmental considerations: Evaluate the operating environment for factors that can impact the V-belts, such as temperature extremes, humidity, or exposure to chemicals. Take appropriate measures, such as implementing ventilation or using heat-resistant belts, to mitigate adverse environmental effects.
  6. Load monitoring: Ensure that the V-belts are not subjected to excessive loads beyond their capacity. Monitor the load requirements of the application and consider factors such as torque, horsepower, and operating conditions. Overloading can lead to accelerated wear and premature belt failure.
  7. Timely replacements: Establish a preventive maintenance schedule for V-belt replacements based on the manufacturer’s recommendations and the observed wear patterns. Replace worn or damaged V-belts promptly to prevent unexpected failures and minimize downtime.
  8. Proper storage: If spare V-belts are kept in stock, store them in a clean, dry, and temperature-controlled environment to avoid deterioration. Follow the manufacturer’s instructions for proper storage conditions.
  9. Training and documentation: Ensure that maintenance personnel receive proper training on V-belt maintenance procedures and safety precautions. Keep detailed records of maintenance activities, including inspections, tension measurements, and replacements, for future reference and tracking.

By implementing these maintenance practices, you can significantly prolong the lifespan of V-belts, reduce the risk of unexpected failures, and optimize the performance of the belt drive system. Regular maintenance not only extends the life of the V-belts but also allows for early detection of potential issues, enabling timely corrective actions to be taken.

v belt

What are the signs of a worn or damaged V-belt that needs replacement?

A worn or damaged V-belt can lead to decreased performance, increased energy consumption, and potential equipment failure. Recognizing the signs of a worn or damaged V-belt is important for timely replacement and preventing further damage. Here are some common signs to look out for:

  1. Visible wear: Inspect the V-belt for visible signs of wear, such as fraying, cracking, or glazing. Excessive wear indicates that the belt has reached the end of its service life and should be replaced.
  2. Chunking or missing pieces: If the V-belt shows signs of chunking or has missing pieces, it is a clear indication of severe damage. This can occur due to excessive tension, overloading, or prolonged use beyond the belt’s capacity.
  3. Excessive noise: A worn or damaged V-belt may produce noticeable noise during operation. This can be in the form of squealing, screeching, or rumbling sounds. The noise is often caused by slipping, misalignment, or belt degradation.
  4. Slippage: If the V-belt slips on the pulleys, resulting in reduced power transmission or inconsistent operation, it indicates a problem. Slippage can occur due to incorrect tension, pulley misalignment, or insufficient grip caused by belt wear.
  5. High heat or burning smell: Excessive heat generated by a V-belt can indicate friction caused by belt slippage or misalignment. If you notice a burning smell or feel excessive heat near the belt drive system, it is a sign of potential belt damage.
  6. Loss of tension: If the V-belt consistently loses tension and requires frequent readjustment, it indicates wear or elongation. Over time, the belt may stretch and lose its original tension, resulting in reduced power transmission efficiency.
  7. Reduced power transmission: A worn or damaged V-belt may struggle to transmit the required power, leading to decreased equipment performance. This can result in slower operation, reduced torque, or inability to handle the load.
  8. Visible cracks or separation: Cracks or separation in the V-belt’s rubber material are clear signs of damage. These can occur due to age, exposure to harsh environments, or chemical degradation. Cracked or separated belts should be replaced immediately.
  9. Shortened belt life: If a V-belt consistently fails or requires replacement sooner than its expected service life, it indicates a problem. Factors such as incorrect tensioning, misalignment, or excessive load can contribute to premature belt failure.

If you observe any of these signs in a V-belt, it is recommended to replace the belt promptly. Continuing to use a worn or damaged V-belt can lead to further damage, increased downtime, and potential equipment failure. Regular maintenance and inspections are essential for identifying and addressing these signs early, ensuring the reliability and longevity of the V-belt system.

China factory 5-15mm High Chevron Conveyor Belt, Rubber Chevron V Belt   axle differentialChina factory 5-15mm High Chevron Conveyor Belt, Rubber Chevron V Belt   axle differential
editor by CX 2024-04-15

Tags: belt | V-belt